– Page 20 –
iSaver DPFC 165 & 250 Series Manual
© 2021 Encorp Limited
When the machine is in ‘AUTO’ mode, this screen will appear.
Manual Mode:
In this mode, you can check each bank. If you want to turn on the first bank, click the BANK 1 ‘ON’ button.
The iSaver Current and iSaver KVAR values are also displayed below each bank. To turn off the bank, click
the OFF button. The Current and KVAR values will display a zero value, indicating that the bank is in OFF
mode.
•
Conduct a final visual check to ensure that it is safe to start commissioning the iSAVER (all connections
secured, tools removed, and safety checks completed).
•
Turn on the breakers within the iSAVER unit.
•
Close the iSAVER main access panel door and secure the panel locks with the key provided.
•
Turn ON the main incomer MCCB located on the exterior front panel door of the iSAVER. It is
recommended that during this startup phase, some plant equipment is turned on to create some
electrical load. It is mandatory to have a minimum of 15% KVAR load (based on the size of equipment
used) to achieve an accurate startup result.
•
The IP Motherboard will turn ON. This can be viewed on the HMI Live Dashboard.
