ENCORE
7
When installing a belt refer to fig. 4 as to the
route of the belt.
BELT ADJUSTMENT
(continued...)
TRACKING
To adjust the tracking there is a stop bolt
located on the bottom side of the steering
control. (See Fig. 5)
To adjust tracking simply loosen the lock
nut on the stop bolt and turn bolt clockwise
to increase speed or counter clockwise to
decrease speed.
DRIVE ADJUSTMENTS
Steering and motion controls should be
uniform in all forward and reverse speeds.
Levers should automatically return to neutral
when released.
CAUTION:
TURN OFF ENGINE BEFORE MAKING ANY
ADJUSTMENTS.
To test drive operations:
Check air pressure in tires. Equal tire
pressure is critical for proper drive
operation.
Check linkage for excessive play.
•
Raise rear of Rider until rear wheels
are off the ground. Safely block the
frame in this position.
•
Put control levers in neutral lock
position (control levers swung
outward).
•
Start engine.
DECK HEIGHT ADJUSTMENT
Mower heights can be adjusted by pushing the
foot pedal and by depressing the height of cut
pin and removing it. Select cutting height and
set pin accordingly.
TENSION
IDLER
BLADE
IDLER
CLUTCH
PULLEY
Fig. 4 - Mower Deck Belt Layout
Fig. 5
Stop Bolt
Cut Pin
CU
TT
IN
G
H
EIG
HT
Fig. 6
Summary of Contents for X-TREME 60K25X
Page 1: ...OPERATORS MANUAL 60K25X...
