64
www.encore-usa.com
Add Port Mapping
Fill in the "
Local IP
", “
Protocol
”, “
Port Range
” and "
Description
" of the setting to be
added and then click "
Add
". Then this Port Mapping setting will be added into the "
Current
Port Mapping Table
" below. If you find any typo before adding it and want to retype again,
just click
<Reset>
and the fields will be cleared.
Remove Port Mapping
If you want to remove a Port Mapping setting from the "
Current Port Mapping Table
",
select the Port Mapping setting that you want to remove in the table and then click
D<Delete Selected>
. If you want to remove all Port Mapping settings from the table, click
<Delete All>
button. Click
<Reset>
will clear your current selections.
Click <
Apply
> at the bottom of the screen to save the above configurations.