36
Ad-hoc
Mode
This is the simplest network configuration with several computers equipped with
the PC Cards that form a wireless network whenever they are within range of one
another. In ad-hoc mode, each client is peer-to-peer, would only have access to
the resources of the other client and does not require an access point. This is the
easiest and least expensive way for the SOHO to set up a wireless network.
h
Profile:
Enter a name for the profile; this does not need to be the same
as the SSID.
h
SSID
: Enter the SSID of the network or select one from the drop-down
list. The SSID is a unique name shared among all points in your wireless
network. The SSID must be identical for all points in the network, and is
case-sensitive.
h
Network Type:
Select
Ad-hoc
from the drop-down list.
h
TX Power:
Select a transmit power from the drop-down list. If your
notebook is connected to external power then select
100
% or
auto
, if
not, select one of the lower values for power saving.
h
Preamble:
Select Auto from the drop-down list, unless you are aware of
the preamble type (long or short) used in each station.
h
Ad-hoc wireless mode:
Select a wireless mode from the drop-down list
depending on the type of stations used in the ad-hoc network. Select
B/G Mix if the network consists of 11b and 11g stations. Select B-only or
G-only if the network consists of only one type of wireless mode.
h
RTS Threshold:
Place a check in this box if you would like to enable
RTS Threshold. Any packet in the RTS/CTS handshake larger than the
specified value (bytes) will be discarded.
Summary of Contents for ENUWI--XAN3
