Station Connection
Connect each station to the switch by twisted-pair cable. Plug one
RJ-45 connector into a RJ-45 port of the switch, and plug the other
RJ-45 connector into the station’s network adapter. Power on the
switch and then system is ready.
Switches Connection
In making a switch interconnection, you could use any port to
connect another switch with straight or crossover cable. As all the
ports support auto MDI / MDI-X function, using a straight cable to
make a switch-to-switch connection is allowed.
For cable selection, see the following table
：
Network Speed
Cable Type
Max. Length
10Mbps
Cat. 3, 4, 5 UTP/STP 100 meters
100Mbps
Cat. 5 UTP/STP
100 meters
1000Mbps
Cat. 5 UTP/STP or
enhanced UTP/STP
100 meters
Network Application
5
Summary of Contents for ENHGS-224
Page 1: ......
