Encore ENDSL-4R5G, User Manual

Page: 12 / 125

11
www.encore-usa.com
Chapter 2 Hardware Installation
Step 1 Connect the DSL interface of the device to the MODEM interface of the splitter
through a telephone cable. Connect the phone to the PHONE interface of the
splitter through a cable. Connect the incoming line to the LINE interface of the
splitter.
The splitter has three interfaces:

LINE : Connect to a wall phone jack (RJ-11 jack).

MODEM : Connect to the ADSL jack of the device.

PHONE : Connect to a telephone set.
Step 2 Connect the LAN interface of the device to the network interface card (NIC) of the
computer through an Ethernet cable (MDI/MDIX).
Note:
Use twisted-pair cables to connect with the hub or switch.
Step 3 Plug one end of the power adapter to the wall outlet and connect the other end to
the Power interface of the device.
2.1 Connection with no telephone set installed before splitter
Figure 1 displays the application diagram for the connection of the router, computer,
splitter and the telephone sets, when no telephone set is placed before the splitter.
Figure 1 Connection diagram (Without connecting telephone set before the splitter)