E3 OP REV.A1
7
DOME LIGHT CONVENIENCE SUPERVISION (Optional Feature)
The alarm has a unique feature that will turn on your vehicle dome light as follows:
1. Upon disarming, the interior light will remain on for 30 seconds.
2. If the vehicle is intruded, the interior light will flash for the same duration as the siren.
Note: Turning on the ignition switch or arming the alarm will turn off the dome light.
IGNITION CONTROL DOOR LOCK/UNLOCK. (Programmable Feature)
If the vehicles door locks have been interfaced to the security system, the system will automatically lock the
vehicle's doors when the ignition is turned “ON” and /or unlock the vehicle’s doors when the ignition is turned “OFF”.
(Default setting is “OFF”)
TRUNK RELEASE (CHANNEL 3) OUTPUT.
Press and hold
button on the transmitter for two seconds to remotely control the trunk release.
.
W. SECOND VEHICLE SECURITY OPERATION:
Your 4-button remote transmitter can be utilized to control a second vehicles security system, To program the
remote control transmitter to a second vehicle, follow the instructions for Transmitter programming.
* For the standard
1 way Transmitter by press button
+
is shift button.
Standard Transmitter
1. Prior to pushing any button on the transmitter. Press
button
+
first on the transmitter.
2. Once
button
+
is pressed the LED on the transmitter will illuminate for 3 seconds to indicate the
second transmitter pin code has built-in.
3.
While the LED is illuminated, press any button on the remote control transmitter to control a second vehicle
security system.
.
SHOCK SENSOR ADJUSTMENT
1. Turn the Ignition 'switch ‘ON/OFF’
3
TIMES and stay in the OFF position.
2. Push the Valet switch 5 times holding in on the 5th push until a long chirp is heard. Then release the valet switch.
You are now in the Alarm feature ‘Shock Sensor’ programming mode.
3. Press and hold
button for 2 seconds. One long siren or horn chirp to indicate the unit is ready to accept
adjustments of the shock sensor.
4. Press
button on the transmitter once. This will
decrease
the sensitivity level by one step. Each time the button
is pushed, a decrease is made the siren /horn chirp will respond with [1] chirp, while 2 chirp indicates the shock
sensor is OFF.
5. Press
button on the transmitter once. This will increase sensitivity level by one step. Each time an increase is
made the siren/horn chirp will respond with [1] chirp, while 2 chirp indicates maximum sensitivity.
6. Hit the bumper or strong metal part of the vehicle to test the threshold level of the sensor.
a). Activate the warn-away (first stage the shock sensor), the siren or horn will emit a short chirp.
b). Activate the full alarm (second stage the shock sensor), the siren or horn will emit a long chirp.
7. When you are satisfied with the setting, press the
button to lock in the adjustment. One long siren or horn or
horn chirp will indicate the unit has locked in the adjustment.
Note: If 30 seconds of inactivity expires, or you turn on the ignition during of above steps, the unit will exit the program
mode and return to the disarmed mode. Three long chirps will confirm exit.
