Connection
1. Connect the power cord to AC outlet.
2. Connect the speaker wire to the speaker jack (25) located on the rear side of unit.
3. Press the power button(8) and the power LED indicator(14) will light up which means the power supply is normal.
Now your system is ready to play the music.
Listening to radio
Manual tuning
1. Select the function selector(12) to “ Tuner “ position.
2. Select the desired band with radio band selector(13) (AM or FM or FM-Stereo).
3. Tune to the required station by turning the tuning knob(18).
4. Adjust volume up/down(7) to the desired volume level.
FM & FM-Stereo reception
z
Set the radio band selector(13) to “ FM ” position. Programs are received in mono mode. When stereo signals are
weak, it is preferable to receive the program in mono.
z
Set the radio band selector(13) to “FM-St” position to receive stereo programs. The FM-Stereo LED indicator(16)
will light up to show FM stereo program is being received.
Hints for best reception:
-
-
AM : the receiver has a built-in AM bar antenna. If AM reception is weak, slightly rotating or re-positioning of the
unit will usually improve the AM reception.
-
FM : the receiver has a built-in FM wire antenna(26) hanging at the rear cabinet. This wire should be completely
unraveled and extended for best reception.
Playing compact discs
z
Getting started
1. Set the function selector(12) to “CD ” position then open the CD tray by pressing the CD tray open button(10). Put
a CD disc into the compartment and close the CD tray.
2. Focus search is performing if disc is inside. Total number of tracks will appear on LCD display(15).
3. Adjust volume up/down(7) to the desired volume level.
-4-
