59
TROUBLESHOOTING GUIDE
SOFTWARE
In case of trouble with the unit, please look through problems and see if you can solve them yourself
before calling your dealer.
NO SOUND:
• If you are not getting any sound into the software application, go back to the preferences as
shown
above and make sure you have selected the USB input for the recording device.
• Power Cycle: Close Audacity, turn off the turntable, unplug the USB Cable. Then plug in the
USB
Cable, turn on the turntable, and reopen Audacity.
• If you are not able to hear any audio as
you play the record, please click on the microphone
drop‐down arrow and select
Monitor Input. This will enable you to hear the audio from the turntable,
even if you have not record‐enabled the Audacity
application.
• If you are not seeing the microphone s
lider, please go to the Preferences menu in Audacity, click on
the Interface tab and make sure that the Enable Mixer Toolbar and Enable Meter
Toolbar options are checked. If they are not, please check them and then press OK.
• Check the microphone slider t
o make sure that it is at full volume, all the way to the right as shown
below. If you find the recording sounds low or distorted, adjust the microphone slider. If you are not
seeing the microphone slider, please go to the Preferences menu in Audacity, click on the Interface
tab and make sure that the Enable Mixer Toolbar and Enable Meter Toolbar options are checked. If
they are not, please check them and then press OK.
Summary of Contents for 2040MO
Page 14: ...14 8 Continue to click on Next Click Create a Desktop icon 9 Click on Install icon...
Page 15: ...15 Click on Next icon...
Page 43: ...43 Click on iPod under Devices then select Summary to enter into interface below...
Page 46: ...46 A dialog box will appear and you may select the Music file Then click the OK button...