9
BASIC OPERATION
POWER
1. When connected to a computer:
NOTE: Remove batteries while connected to computer.
USB powered: Connect one end of the USB cable (included) to the mini USB socket on the unit.
Connect the other end into the USB socket on your computer.
Adjust the VOLUME knob to your desired volume level.
2. When not connected to a computer:
A. Battery powered: Open the cassette door then open the battery door and place 2 ‘AA’ size
batteries (not included) into the battery compartment. Be sure to match the battery polarity shown
on the compartment
(+/
‐
). Then close the battery door.
NOTE: To prevent possible damage to this unit:
*Load new batteries with
their polarities (“+” and“‐”) aligned correctly.
*Do not apply heat to batteries, or internal short circuit may occur.
*If this unit is not to be used for a long period of time, remove all batteries and store them in a cool
and dry place.
*Remove old, drained batteries immediately and dispose of them.
LISTENING TO A TAPE
1. Open the cassette door manually. Load a cassette tape with the open edge facing upward and
gently close the cassette door.
2. Select your playback output.
•
HEADPHONE: Turn VOLUME knob to lowest position. Then plug in your headphone. Re
‐
adjust the
VOLUME knob to a comfortable sound
level without any distortion. Once you’ve set your sound level,
please leave the volume alone.
NOTE: Since hearing damage from loud noise is usually undetectable until it is too late, be sure the
volume level is not too high.
3. Press the PLAY
button. At the end of the cassette tape, the unit will stop automatically.
4. Press the F.FWD button to advance the tape. When it reaches
the end of tape, the unit will stop
automatically.
5. Press Auto rewind button #8 and the tape of side A will turn into side B.
6. Press STOP button to stop the tape playback or it will stop automatically when it reaches the end of
tape playback.
RECORD TO PC
Audio from TAPE can be recorded on the computer.
To record from cassette tape, load a cassette tape into the unit and press PLAY button to start
playback.
Summary of Contents for 2040MO
Page 14: ...14 8 Continue to click on Next Click Create a Desktop icon 9 Click on Install icon...
Page 15: ...15 Click on Next icon...
Page 43: ...43 Click on iPod under Devices then select Summary to enter into interface below...
Page 46: ...46 A dialog box will appear and you may select the Music file Then click the OK button...
