8
V20170626
•
Make a note of changes made if you are going to work with static IPs.
•
The gateway will always use the ethernet connection, then wifi and then 3G
Important:
In case the gateway is not connected by ethernet or wifi, you can access the configuration
page by accessing the ip 192.168.2.100. Connect a direct network cable from your pc to the
gateway, and set the IP of your PC in that range (for example, you can set your ip to
192.168.2.101). Consult the operating system help to know how to perform this step.
2
GUARANTEE
Sensing & Control warrants to the original purchaser of the equipment for a period of 12 months from the
date of purchase (as stated on receipt of purchase), this product will be free from defects in material and
workmanship and will operate in accordance with the detailed description in This manual, the quick start
guide and the service user manual.
If the product is defective in material or workmanship, or if the product does not function as guaranteed
during the warranty period, Sensing & Control will replace it once the ARM (Return Merchandise
Authorization) protocol has been met. The replacement mentioned above with respect to the product will
be the total responsibility of Sensing & Control.
Sensing & Control will transfer to the user the guarantees on the materials granted by the manufacturer to
the extent that they are transferable, but will not guarantee any material independently.
2.1
CASES NOT INCLUDED IN THE COVERAGE OF THE WARRANTY
This warranty does not apply if the product is damaged by transportation, handling, storage, accident, abuse
or misuse, if the product has been used or maintained without following the instructions in this document,
if it has been modified Some form or if the serial number has been deleted or has something written on it.
The repair or modification of the product by any means other than an authorized agent will void this
warranty
2.2
USER RESPONSABILITIES
To receive this warranty service during the period in which the product is guaranteed, as established
above, the user must send a request to Sensing & Control complete the following steps:
1.
Contact Sensing & Control Technical Support for an RMA number (Material Return Authorization).
2.
Return the damaged product to the address provided by the technical support service of (the
shipping costs are assumed by the user).
3.
Lastly, provide proof with the original date on which the purchase was made.
