background image

 

 

V20170626 

Electrical and electronic materials contain parts that are necessary for the system to work properly, if not 
handled correctly they can harm health and the environment. 

Therefore, please do not throw your damaged device with normal trash. 

If you are the owner of the appliance, you must deposit it at the appropriate local collection point or leave 
it to the supplier when you buy a new appliance. 

If you are a professional user, please follow the instructions of your provider. If the appliance is rented or 
left to your care, please contact your supplier.  

Help us to protect the environment we live in! 

¡Warnings!

 

Attention

Failure to follow these instructions could result in death or serious personal injury.

 

1.

 

Read all instructions carefully before connecting the equipment to your power source.  

2.

 

Verify the device's power type in the labelling.  

3.

 

Use the power adapter included in the packaging of your device. To reduce the risk of electric shock, do not 
remove the cover or attempt to disassemble it. Opening or removing the cover may expose you to dangerous 
voltage levels. Likewise, improper mounting may cause electric shock with the use of the device.  

4.

 

Do not expose this device to fire, direct sunlight or excessive heat.  

5.

 

Do not expose this equipment to rain or moisture and do not allow it to come in contact with water.  

6.

 

Do not install this device in an environment where IMPACT RISK is likely to occur.  

7.

 

You can clean this device using a thin cloth. Never use solvents or abrasive products that can damage the plastic 
surface. Never use spray or other cleaning products.  

8.

 

Be careful not to scratch the plastic surface.  

9.

 

The device is designed to operate in temperatures between 0 ° C and 40 ° C.  

10.

 

The device must be installed at least 1 meter from radio frequency equipment, such as TVs, radios, hi-fi or video 
(which can radiate electromagnetic fields). 

11.

 

Do not install the equipment behind a cabinet or any heavy equipment, or otherwise block the wireless signal.  

12.

 

Do not quickly disconnect and reconnect the power connection of the device or damage it. If you have to turn it 
off, use the tools within the program intended for that purpose. If an operator instructs you to disconnect, wait 
at least 10 seconds before reconnecting.  

13.

 

Do not connect the Ethernet port to any network other than Ethernet.  

14.

 

Do not attempt to upgrade this equipment in an environment with electrical instability. This could cause 
unexpected problems. 

15.

 

Do not operate the system or connect / disconnect cables during lightning storms.  

16.

 

Children are not aware of the hazards of electrical appliances. Therefore, keep the device under adult 
supervision or out of the reach of children. 

Do not attempt to repair the device yourself. If you experience problems with the equipment, or need repair or 
warranty information, please contact your supplier. 
 
This device is intended for indoor use only. 

Summary of Contents for RSP1003














Reviews: