VE RS I ON
D O CU MEN T TI TLE
RE LEAS E DAT E
03
EL
–
Owner’s Manual
2022-04-29
EL
–
Owner’s Manual –
Rev.04
–
April 2022
11
This is a draft manual, technical specifications are subject to change
Operators must comply with the general safety principles during the handling phases. In particular:
Caution! The device is heavy!
Before handling, moving, and commissioning the device
–
assess the hazards
of the operation and study the manual. Appropriate PPE must be worn, such
as cut resistant gloves, safety shoes, protective goggles, etc. depending on the
activity.
Clear the area of work before starting to mount the device.
The device is heavy and must be lifted by at least 2 people
–
plan around this
and allow ample space to move around.
Do not lift the device over your head.
Caution!
During handling of the device, be cautious and use the handles on the device
to minimise the mechanical risks, such as:
Impacts and crushing injuries due to uncontrolled movements of the load.
Dropping the device, causing crushing injuries
Loss of stability, leading to entanglements and other injuries.
The packaging/device must be handled by at least two people.
3.3
ELECTRICAL HAZARDS
The device poses no special electrical hazards, if the following instructions on safety measures are
followed and the Electrical Connection Guide below is applied correctly:
Caution! The device requires an electrical power supply!
Handle the electrical installation with care. Ensure that the power plug is fastened
correctly into the socket to avoid any loosening of the wiring.
Use only the supply voltage specified for the device.
Do not short-circuit inputs and outputs.
Do not reverse the polarity of inputs and outputs.
Do not insert any mechanical parts, especially metal parts, into the device through
the ventilation slots or other openings.
Do not use liquids near the device.
Never use the device if any part of it has been immersed in water.
Do not touch the antenna when the device is powered on, ensure you are
electrostatically discharged when mounting/dismounting the antenna.
Warning!
Always turn off the power supply when the device is being cleaned, maintained, or
transported. Any servicing, other than cleaning and routine user maintenance, must be
performed by trained, Enapter-endorsed technicians.