Mounts anywhere!
Mounts anywhere!
Mounts anywhere!
Mounts anywhere!
This sturdy clamp and gooseneck has an easily adjustable ball joint
with a Mini-Gumball switch. Mounts to tabletops, wheelchair trays or
bedrails. Size: 14"H. Weight: 1 lb.
Mounting Setup
Mounting Setup
Mounting Setup
Mounting Setup::::
1.
The base clamp comes with two removable rubber clamping pads.
One is set in place and the second is stored on the back of the
clamp. Choose the pad that gives the clamp the best hold for your
mounting application. (See photos). Next attach the clamp to your
mounting surface.
2.
Once the Gooseneck is mounted you will want to adjust position or
the angle of the gooseneck for the best placement. Gently bend
the Gooseneck to the desired position. To fine tune your
placement of the switch, loosen the set knob on the ball-joint.
Next adjust the switch to the desired position and then tighten the
set knob. (See Photo).
Switch Operation:
Switch Operation:
Switch Operation:
Switch Operation:
1.
Plug the Mini Gum Ball Switch into the jack on your switch-
adapted toy/device.
2.
If it is necessary for you to use an adapter, make sure that you
use a MONO adapter, not a STEREO adapter.
3.
Make sure that the connection between the Mini Gum Ball Switch
and your toy/device is tight. There should be no gaps.
4.
Simply press anywhere on the Mini Gum Ball Switch’s colored top
to activate your toy/device.
5.
The toy/device will only remain activated while the Mini Gum Ball
Switch continues to be actuated. Once you release the switch, the
toy/device will turn off.
Troubleshooting:
Troubleshooting:
Troubleshooting:
Troubleshooting:
Problem:
Problem:
Problem:
Problem: The Mini Gum Ball Switch does not activate your toy/device.
Action #1:
Action #1:
Action #1:
Action #1: Make sure that the connection between the Mini Gum Ball
Switch and your toy/device is tight. There should be
no
no
no
no
gaps. This is a
common error and an easy fix.
Action #2:
Action #2:
Action #2:
Action #2: Try a different switch with your toy/device to rule out the
toy/device as the source of the problem.
Actio
Actio
Actio
Action #3:
n #3:
n #3:
n #3: Try a different adapter (if applicable) to rule this out as the
source of the problem.
Care of Unit:
Care of Unit:
Care of Unit:
Care of Unit:
The Mini Mount can be wiped clean with any mild household multi-
purpose cleaner and disinfectant. We recommend Simple Green,
which is a non toxic biodegradable all-purpose cleaner.
Do not use abrasive cleaners,
Do not use abrasive cleaners,
Do not use abrasive cleaners,
Do not use abrasive cleaners, as they will scratch the surface of the
unit.
Rev
Rev
Rev
Rev 5
5
5
5/4
/4
/4
/4/1
/1
/1
/17
7
7
7
