4.
Once the arm is in position you can now place your iPad and platform on the arm. First back
off the set knob on the iPad Pro platform until it is flush with the inside of the opening. This
is necessary to allow the holder to be pushed all the way down on the mounting arm post.
Once this is done you can tighten the set knob to lock the platform to the arm. Please Note:
Make sure to back the set screw enough to allow the platform to be pushed all the way down
on the post of the arm, failure to do so will cause the iPad to fall off the mounting arm and a
fall could cause damage to your iPad. (See Fig. 4).
Fig.4
5.
Installing your iPad:
Now that you have your mounting arm assembled and adjusted you
can now place your iPad Pro into the holder. Slip one side of your iPad Pro under the bungee
cord holder, making sure you have all your ports lined up with the holder. Adjust and secure
with the second bungee cord holder (See Fig. 5). The iPad Pro platform can be oriented in
either the landscape or portrait position (See Fig. 6). This mount will hold any full size iPad
Pro with or without a case. (We recommend our case Item No.1586 for the iPad Pro).
Pg. 3
Tighten Set
Knob