Fig. 2
2.
Clamping Options:
Our mounting clamp is designed for mounting to tubular (wheelchair,
bedrail, walker, etc.) or flat surfaces such as a table top or desk. For flat surface mounting use
the included wedge insert shoe stored in front of the locking knob on the clamp (see Fig.3)
Loosen locking knob slightly to remove wedge, tighten knob once wedge has been removed.
Fig.3
3.
At this point we recommend you place your mounting arm without the iPad Pro mounting
platform and do a rough setup, you can fine tune your adjustments after you have placed the
iPad platform on the arm. Do not force or try adjusting the arm without first loosening the
set knobs for that portion of the arm. Each section of the arm has a set knob. Once you have
the arm in the desired position you can tighten the knobs to lock the arm in place.
Pg. 2
Tighten
Clamp
Locking
Knob