EMX Industries, Inc.
Tech support: 216-834-0761
1/7
MVP D-TEK_Rev2.0_081319 [email protected]
MVP D-TEK
™
Multi-Voltage Vehicle Loop Detector
Instruction Manual
The MVP D-TEK vehicle loop detector allows for detection of metallic objects entering the field formed
around an induction loop. This detector automatically adjusts to input power from 12 VDC up to 240 VAC
which eliminates the installer’s need to match available power to an appropriately rated vehicle detector.
The MVP D-TEK is made from anodized aluminum and all switches have gold plated contacts that are sealed
for protection. It features full loop diagnostic with frequency counter, 10 sensitivity settings, delay mode,
extend mode, fail safe/fail secure mode, automatic sensitivity boost, pulse and presence operating modes
and two output relays.
Cautions and Warnings
This product is an accessory or part of a system. Install the MVP D-TEK according to
instructions from the gate or door operator manufacturer. Comply with all applicable
codes and safety regulations.
•
MVP D-TEK
Multi-voltage vehicle loop detector (included)
•
HAR-11
11 position harness, 3
’
of wire
•
LD-11
11 pin DIN rail socket, black, wide base
•
LD-11B
11 pin DIN rail socket, black, narrow base
•
PR-XX
Lite preformed loop (XX
–
specify size)
•
TSTL
Test loop, troubleshooting tool
Specifications
Power
12-60 VDC or 12-240 VAC (48-62 Hz)
Draw Current
19.2 mA
Loop Frequency
3 settings (low, medium, high)
Loop Induction
20-
2000 μH (Q factor ≥ 5)
Surge Protection
MOV, neon and silicon protection devices
Relay Contact Rating
2 DPST 1A @ 30 VDC
Operating Temperature
-40º to 180ºF (-40º to 82ºC)
Housing Material
Anodized aluminum
Connector
11 pin male connector (JEDEC B11-88)
compatible with DIN rail mount socket or wire harness
Dimensions (L x W x H)
3.25” (83 mm) x 2.56” (40 mm) x 3.65”
(90 mm)
Ordering Information
TM
