EMX Industries, Inc.
Tech support: 216-518-9889
3/15
CellOpener-365_Rev1.0_0601201 [email protected]
Please make sure that the mobile phone you are using to program this unit has its
Caller ID ON
.
Follow the instructions below to program the unit by SMS as per instructions below:
1.
Adding & Deleting Phone Numbers
You can program and add up to 1600 phone numbers to be as normal users by sending SMS.
The example below shows how to add 2 phone numbers and delete one phone number by SMS:
9999AN.0417315263.0418655002.DE.0902345678
9999
Is the password (default password 9999)
AN
Add the following normal number(s).
DE
Delete the following normal number(s).
.
The dot marks the end of a number or command.
*Note: There is no need for the dot “.” at the end of the SMS command. The maximum phone numbers are 5 phone numbers
that can be added or deleted by one SMS command.
The unit should reply by SMS that says:
Confirming: 0417315263.0418655002 added, 0902345678 deleted.
The unit will disregard any phone numbers that were listed and could not be found in the
system memory of the unit.
2.
Deleting All of the Phone Numbers
To delete all the phone numbers, send the following SMS:
9999format
The unit will reply:
THIS IS A WARNING. Do you wish to DELETE all the phone numbers?
If you wish to proceed, confirm by sending “YES” in all capital letters:
YES
The unit will send back SMS that says:
All phone numbers were deleted
*Note: Ignoring the warning message and not replying “YES ” within two minutes, will cause the unit to disregard the last
command and the phone numbers would be saved and not be deleted.
Programming
