LP1005DC-CM2 Hardware Installation Manual
Page 5
Figure 3: I/O expansion tray installed. (HS20 or similar server type depicted.)
6.
Using a Phillips head screwdriver, fasten the I/O expansion card tray to the Blade Server with the four screws
that accompany the HBA.
7.
Align the LP1005DC-CM2 HBA with the tray as follows:
•
Slide the narrow edge of the HBA into the raised hook on the tray.
Note: If you are installing only one I/O expansion card in your HS40 Blade Server, it must
be installed in the I/O expansion card location #2 (the slot further in from the edge).
