LP1005DC-CM2 Hardware Installation Manual
Page 6
Figure 4: Slide the narrow edge of the HBA into the raised hook on the tray. (HS20 or similar server type depicted.)
•
Carefully align the connector on the HBA with both the 200-pin Molex connector and the
high speed differential pair connector on the Blade Server. Where the label on the HBA
says 'Press to Install', gently press the HBA connector into the Server Blade connector.
8.
Close the Blade Server cover that you opened in step 3.
9.
Reinstall the Blade Server into the BladeCenter server bay.
