background image

Combined Boot User Manual

Page 1

 

Introduction

Combined Boot contains two types of boot code: x86 BootBIOS for x86 systems, and OpenBoot for 
SPARC Peripheral Component Interconnect (PCI) and AIX systems. Combined Boot determines your 
system platform (x86 or SPARC) and automatically downloads the proper boot code image to the host 
bus adapter (HBA).

x86 BootBIOS works with the existing basic input output system (BIOS) on x86 systems. x86 BootBIOS 
allows you to designate a Fibre Channel drive as the boot drive.

OpenBoot is a set of FCode instructions in the HBA flash read-only memory (ROM) that allows you to 
designate a Fibre Channel hard drive as the boot drive. OpenBoot works with the existing system BIOS 
on SPARC PCI systems.

Compatibility

Combined Boot is compatible with the following Emulex

®

 Fibre Channel PCI HBAs:

LP9402DC, LP9002DC, LP9002L and LP9000 (minimum firmware version 3.82a1)

LP8000 and LP8000DC (minimum firmware version 2.81)

Things to Know Before You Download

Combined Boot is a complete single boot image. Therefore, the HBA utility software enables or 
disables two types of boot code (x86 BootBIOS and OpenBoot).

This download assumes that there is already a local boot disk.

As a measure of protection, ensure that critical files on your local boot disk are backed up.

The .PRG files included in this release contain only the boot code overlay (no firmware).

Known Issues

The following issue has been reported at the time of publication. 

None at this time.

Files Included in This Release

This kit includes the following files:

File Name

Description

readme.txt

Release notes for Combined Boot version 5.01a0

cc501a0.prg

LP9402DC, LP9002DC, LP9002L and LP9000 Combined Boot image

dc501a0.prg

LP8000 and LP8000DC Combined Boot image

Summary of Contents for Combined Boot 5.01a0































Reviews: