Torque wrench DEU
4
Operating instruction edition: 01.04.2018
1 Determined use
Do not use the torque wrench for any other purpose than to tighten screws or
bolts.
Do not use the torque wrench beyond the maximum measuring range; measuring
range see Table 1, page 8.
Attention
Please make sure to use the appropriate wrench for the torque to be
measured.
Do not use loosen rusty and / or corroded screw fittings as the tool may be
overloaded.
Ensure the correct adapters are used, size and adaptation see Table 1, page 8.
Do not reduce the square adaptation on the torque wrench by using adapter.
Do not lengthen the handles by using additional aids e.g. plug the handle into a
pipe. This may damage the torque wrench and/or disturb the calibration.
Only activate the torque wrench at the handle. A marking at the handle shows the
position where the force appears.
Only pull and push the handle smoothly, never jerkily.
The non-determined use exempts the manufacturer from any liability!
Tube
Ring-marking for force
starting point
