EMTRON ELC USER MANUAL
WWW.EMTRON.WORLD
© EMTRON AUSTRALIA PTY LTD MARCH 2018
16
Figure 7.0. Example ELC2M device detected by the ECU.
Figure 7.1. Example ELC2 device detected by the ECU
7.12 ECU CAN Channel Configuration for Single Device
The next step is to configure an ECU CAN channel, allowing the ECU to decode the ELC CAN
packets.
For this example, CAN 1- Channel 1 has been selected.
1.
Set "Enable" to (ON)
2.
Set "CAN Base Address" to the ID shown in Figure 7.0/7.1 In this example its ID 671.
3.
Set "DATA Set" to 50 (ELC/ELC2M 1x Device). See Figure 7.2.
The ECU in now configured and reading the data from the ELC Device.
Figure 7.2.
ELC CAN Configuration