11
IN8-KEYPADDB1
09/27/2010
Restoring the Lock to Factory Default Setting
• Remove power (disconnect 9V battery) from Lock
• Press and Hold EMTEK button
• While continuing to hold EMTEK button, restore power (reconnect 9V battery)
• Continue to hold EMTEK button for 3 seconds
• 1 Green LED Flash and 2 short beeps followed by 1 Green LED Flash and 2 short
beeps indicates the lock has been successfully restored
This procedure clears the lock of all users and restores the Programming Code and
2 User Codes shipped with the lock.
Function
Indicators
Valid Code
• 1 short beep, EMTEK button flashes
Green.
Invalid Code/Access Denied*
• 1 Red LED flash
• 2 short beeps
Lock-Out Mode Error
• 2 short beeps
• 1 short beep per second for duration
Access Accepted
• 1 short beep
• 1 Green LED flash
Low Battery
• 4 Red LED flashes
• 4 short beeps
Blackout Battery
**
• 1 long Red LED flash
• 4 long beeps
Button Press Accepted
• 1 Yellow LED flash
• 1 Short Beep
Outside Thumb Turn Enabled
• 2 Green LED flashes
Keypad Operation - Beeper & LED Indicators
Place Sticker Here
* If 3 consecutive incorrect codes are entered, the lock emits 4 short beeps and a flashing Red EMTEK
button. The lock will not accept additional input for 20 seconds (20 beeps).
** Battery voltage has dropped too low; keypad will be disabled but metal key override will still work.
