1. Install Thermal Camera PC Software on Windows 10 / 64bit PC.
- Download MT30 PC viewer software(MT30-EBB_Viewer-x.x.x.zip) from the provided USB memory card or www.emtake.com .
- Unzip MT30-EBB_Viewer-x.x.x.zip (Password is EMTAKE_MT30) and
Execute “MT30-EBB_Viewer x.x.x.exe” on PC.
2. Connect EBB directly to PC USB Port or to USB Hub (5V DC & Data).
(Notice) The EBB must be connected to the PC before the camera to supply power.
3.
Connect the USB port on the bottom of the thermal imaging camera to the USB port on the PC (or use a powered USB
-
[Normal]
: Directly connect the camera's USB port and the PC's USB port(5V DC output) using the provided “USB 5 pin cable”.
-
[For more stable power supply]
: Use separate the “Powered USB Extension” (in the Package Box).
Reason why : Sometimes the camera does not work because the output voltage of the USB port of an old PC or some PCs is unstable.
[Setup]
Camera and PC connection
(Connection 1) Direct USB connection between camera and PC
(Connection 2) Powered USB extension between camera and PC
EBB and PC connection
(1) Attaching EBB to the top of the camera( Tape +Band)
=
(2) Connect EBB directly to PC USB port or USB Hub(DC 5V & Data)
(Method 2) EBB and USB Hub
Powered USB Extension
※
Tripod is not included.
(Method 1) EBB and PC
connection
Without
Blackbody
3 / 10
