Manual-EMT-928
7/13
Installing the platter
The
turntable’s
platter is laying freely on the sub-platter. During assembling, please make sure to guide the main-platter exactly vertically on the sub-platter.
The main-platter has an inlay of a specified high density mat. Please take care of this mat to avoid damage during installation.
1.
Guide the main platter (1) carefully and absolutely vertically from above on the sub-platter.
2.
Make sure the main platter is bearing completely on the sub-platter.
3.
If needed, dress the inlay-mat (2) in the marked area (3)
, so the record will lay on an absolutely even surface.
Removing the platter
Carefully lift the main platter up to remove it from the sub-platter. Make sure to guide it avsolutely vertically.
1
2
3