Manual-EMT-928
5/13
Installing tonearm
The EMT 928 features a tonearm-adapter and output terminal, both acces-
sible from underneath the chassis. To complete the installation of the tone-
arm, place the turntable as shown in the picture. The installation of the
tonearm must be done by a qualified professional.
Warning:
To prevent damage to the main bearing, always remove the platter from
turntable before moving it from the horizontal position.
Installation Process
-
Remove the tonearm-cover (1) from the chassis
-
Make sure the tonearm-adapter (2) suits the specification of your
tonearm. Please ask your dealer for support.
-
Install your tonearm. Follow the manual provided by the tonearm
manufacturer.
-
Solder the GND-wire of the tonearm to the GND-terminal (3)
-
Solder the right channel output wire to the related RCA-terminal (4).
Red = hot, Green = Cold
-
Solder the left channel output wire to the related RCA-terminal (5).
White = hot, Blue = Cold
-
Close the tonearm-cover (1) and tighten the four fastening screws.
1
3
4
5
2
