7
4.2 Configuration
4.2.1 VLAN
4.2.1.1 Static VLAN
This page shows information of static VLAN entries. User can add/remove static VLAN entries in this page.
Figure: 4.2.1
Parameter
Description
Member
The Port is a member of the specified VLAN and the frames of this VLAN can
be switched through this port, but the tagging information in the frame header
is not modified by the Switch.
Untagged
The port is an untagged port (as defined in 802.1Q) that is participating in the
VLAN. In such an untagged port the Switch will strip off the 802.1Q tag from
the incoming and outgoing frames if they are tagged in such a way. This is
used for sending frames to non-802.1Q-compliant devices.
Tagged
The port is a tagged port (as defined in 802.1Q) and is participating in the
VLAN. The Switch will put the VLAN information of the port – including VID
and Priority – into the header of the untagged frames coming in or transmitted
from the port. The tagged VLAN information in the frames can later be used
by other 802.1Q-compliant devices for forwarding decisions.
Not Member The port is not participating in the VLAN as identified by the selected VID(VLAN ID).
Note:
a.) Default VLAN with VIS being “1” cann’t be removed.
