•
Storing the configuration file into the
gateway
2.3.1 Configuration file
The configuration file is a text file with the ex-
tension *.gcf. This file holds all data needed by
the gateway for operation. A complete sample
configuration is located in chapter “4.1 Confi-
guration file”.
The values can either be entered in decimal or
hexadecimal notation. Using the hexadecimal
notation, put the character “x” directly before
the particular value.
There are two types of parameters, general
parameters and routing settings. General
parameters include operating information for
the gateway. Routing settings are used for
mapping and filtering of identifiers.
Some parameters are optional. If they are not
defined, the gateway uses default settings.
Simultaneous programming of several devices
is not possible. It must be guaranteed, that
each device can be clearly identified.
In the following all parameters are listed and
described.
#
comment
The configuration file can be provided with
comments. Comments are prefaced with the
character “#” and they end with the particular
line.
CG-ARM7/RMD
CAN/CAN - Gateway
User Manual
3
