EMS 7000 IRIS +
7940 ENGINEERS GUIDE v2.2 – 13/04/10
19
11.11
By using the “4” button to move left or the “6” button to move right, move to the
letter or number required and press the “5” button to select the character.
11.12
Repeat 11.11 until all letters have been selected. Once completed press
the “
” button to save the information.
11.13
Once completed you may now escape from this menu by pressing the “3” button
on the keypad until the “SYSTEM RESET” message appears, or by returning the
key to the “CLEAR”
position.
12. Adding A Transmitter Into The 7703 Radio Receiver
12.1
The
following
sequence
of
operations
is
required
when
adding
a
transmitter into the UHF 7703 Radio Receiver.
12.2
Turn the key on the 7703 receiver to the “RESET” position.
12.3
Turn the key to “TEST” and back to “RESET” three times. Allow not more than
one second between switching actions.
12.4
Wait until the red alarm LED starts flashing and then activate the
transmitters onboard tamper switch.
12.5
The green Local LED will now flash and a buzzer sound.
12.6
Activate the tamper switch again. The yellow Low Battery LED will light
and the buzzer will sound three times to acknowledge the transmitter has
been added into the system.
12.7
Repeat the above procedure for any further transmitters to be added.
KEY FUNCTION
0
Enters a blank space into the new device name being entered.
3
Exits to the previous menu
4
Moves the alphabet wheel of characters to the
Left
, by one character
space at a time.
5
Enters the character in the
centre
directly above the character
selector
|.
6
Moves the alphabet wheel of characters to the
Right
, by one character
space at a time.
7
Moves the flashing cursor to the
left
, through the new device name by
one character space at a time.
8
Moves the alphabet wheel of characters to the
Right
, by 12 character
Spaces at a time.
9
Moves the flashing cursor to the
Right
, through the new device name by
one character space at a time.
Backspace Key,
Deletes
by one character. (Deletes to the left only)
Saves and completes the current activity and returns the program to the
appropriate display.
