EMS 7000 IRIS +
7940 ENGINEERS GUIDE v2.2 – 13/04/10
16
10. Adding A Transmitter Into The IRIS Radio Receiver
The following sequence of operations is required when adding a transmitter into the UHF
IRIS Radio Receiver.
10.1 The
IRIS
LCD screen with the
key in the “CLEAR” position will
show the following display:
System Clear
01/10/93 13:26
10.2
Turn the front panel key to
“RESET”. The screen will change
to display:
*** SYSTEM RESET ***
13:26
10.3 Press the “0” button, the screen
will now change to display:
Enter Your PIN
For Menus > _
=Done
=Del 13:26
10.4 Enter the engineering default
PIN: “221100” and press the “
”
button, the screen will change to
display:
| ** Main Menu ** |
> Pins & Access <
| System Support |
2=Help 13:27
10.5 Press
“
”
until
the
screen
displays:
| Time and Date |
> Radio Setup <
| Output Setup |
2 = Help 16: 37
10.6 Press the “1” button and the
screen will change to display:
| ** Radio Setup ** |
> Add Transmitter <
| Txer Details |
2 = Help 16:37
10.7 Press the “1” button and the
screen will change to display:
| Add Transmitter |
> Add Handpush <
| Add Moneyclip |
2 = Help 16:37
10.8
Press the “1” button and use
the “
” or “
” arrow keys to
highlight the type of transmitter
to be added, the screen will
change to display the options
available:
| Handpush Type |
> Opposed Action <
| Non-Opposed |
2 = Help 16:37
10.9
With Opposed Action between
the > and < arrows press the
“1” button and the screen will
change to display:
Operate Transmitter
NOW or press
Escape to cancel
16:38