SelectaCell
TM
Operator’s Manual – Preliminary
EMS
Wireless
EMS
Wireless
SelectaCell®-19S
Manual
Confidential and Proprietary Information
IM609873-1 Rev 01
07/11/05
14
This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment
Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Cet appareillage numérique de la classe B répond à toutes les exigences de l'interférence canadienne
causant des règlements d'équipement.L'opération est sujette aux deux conditions suivantes: (1) ce
dispositif peut ne pas causer l'interférence nocive, et (2) ce dispositif doit accepter n'importe quelle
interférence reçue, y compris l'interférence qui peut causer l'opération peu désirée.
Safety Considerations
When installing or using this product, observe all safety precautions during handling and operation.
Failure to comply with the following general safety precautions and with specific precautions described
elsewhere in this manual violates the safety standards of the design, manufacture, and intended use of
this product. EMS
Wireless
assumes no liability for the customer's failure to comply with these
precautions.
WARNING
WARNING calls attention to a procedure or practice, which if ignored, may result in damage to the system
or system component. Do not perform any procedure preceded by a WARNING until described conditions
are fully understood and met.
If You Need Help
If you need additional copies of this manual, or have questions about system options, or need help with
installation and using of the system, please contact EMS
Wireless’
Customer Support.
EMS
Wireless
Customer Support
2850 Colonnades Court NW, Norcross, GA 30071
+1 770.582.0555 x 5310
email: [email protected]
Service
Do not attempt to modify or service any part of this product other than in accordance with
procedures outlined in this Operator's Manual. If the product does not meet its warranted
specifications, or if a problem is encountered that requires service, notify EMS
Wireless’
customer support department. Service will be rendered according the EMS
Wireless’
warranty
and repair policy. The product shall not be returned without contacting EMS
Wireless
and
obtaining a return authorization number from the Customer Support department.
When returning a product for service, include the following information: Owner, Model Number,
Serial Number, Return Authorization Number (obtained in advance from EMS
Wireless
Customer Support Department), service required and/or a description of the problem
encountered.
The
EMS
Wireless
Quality Plan includes product test and inspection operations to verify the
quality and reliability of our products.
EMS
Wireless
uses every reasonable precaution to ensure that every device meets published
electrical, optical, and mechanical specifications prior to shipment. Customers are asked to
advise their incoming inspection, assembly, and test personnel as to the precautions required in
handling and testing ESD sensitive components. Physical damage to the external surfaces voids
warranty.
Summary of Contents for SelectaCell-19S
Page 3: ......
