34846-2-1016
Page 38
PROFLAME - IP CONTROL SYSTEM
TRANSMITTER (REMOTE CONTROL WITH LCD DISPLAY)
The Proflame Transmitter uses a streamline design with a simple
button layout and informative LCD display
(Figure 58).
The Transmitter is powered by 3 AAA type batteries. A Mode
Button is provided to Index between the features and a
Thermostat Button is used to turn on/off or index through
thermostat functions
(Figures 58 and 59).
Figure 58 - Proflame Transmitter
Figure 59 - Transmitter LCD display
RECEIVER
The Proflame Receiver
(Figures 60a and 60b)
connects directly
to the gas valve and stepper motor with a wiring harness. The
Receiver is powered by 4 AA type batteries. The Receiver
accepts commands via radio frequency from the Transmitter to
operate the fireplace in accordance with the particular Proflame
system configuration. The Receiver three position slider switch
can be set to one of three positions: ON (Manual Override),
Remote (Remote control) or Off.
Figure 60a - Proflame Receiver Body Front
Figure 60b - Proflame Receiver Body Back