background image

Page 6

40390-0-0119

CAUTION

The transmitter and receiver are radio frequency devices. 

Placing the receiver in or near metal may severely reduce 

the signal range.

Notice:

•  Turn OFF the main gas supply of the fireplace during 

installation or maintenance of the receiver.

•  Place the receiver's 3-position slider switch in the OFF 

position during installation or maintenance.

WARNING

Fire  Hazard.  The  receiver  lights  the  fireplace,  which  can 

turn  on  suddenly.  Keep  away  from  the  fireplace  burner 

when operating the remote system or activating manual 

bypass of the remote system.

WARNING

Property damage Hazard. Excessive heat can cause property 

damage. The fireplace can stay lit for many hours. Turn off 

the fireplace if it is not going to be attended for any length 

of time. 

WARNING

Always place the Transmitter where children can not reach it.

USING THE REMOTE CONTROL

TRANSMITTER (REMOTE CONTROL WITH LCd dISPLAY)

The Proflame Transmitter uses a streamline design with a simple 

button layout and informative LCD display. 

See Figure 6

.

The Transmitter is powered by 3 AAA type batteries. A Mode 

Button is provided to Index between the features and a 

Thermostat Button is used to turn on/off or index through 

thermostat functions.

 See Figures 6 and 7.

Blue LCD Display

UP/DOWN Arrow Button

ON/OFF Button

THERMOSTAT Button

MODE Button

Figure 6

 - Proflame Transmitter (Remote Control)

Figure 7

 - Transmitter LCD display

LEd BRIGHTNESS BUTTON

Press the LED Brightness Button to activate the LED lights and 

to switch the LED Intensity to High, Medium, Low or Off.  

1 – On – High

2 – Medium 

3 – Low 

4 – Off 

Use the Brightness Button in conjunction with the Mode Button to 

create unique looks.

Lights will remember the last Mode when turned on again. (After 

a power failure, you must reset the lights to the desired Mode.)  

Turn off the LED Lights when not in use.

LEd MOdE BUTTON

Press the Mode Button to switch LED light system from 

Automatic Color Changes to Individual Colors.  

1 – Auto-cycle – Rapid 

2 – Auto-cycle – Gradual

3 – Pause Auto-cycle

4 – Deep Blue

5 – Royal Violet

6 – Cardinal Red

7 – Sea Green

8 – Forest Green

9 – Tranquil Blue

10 – White

LEd ANd FIREPLACE WALL CONTROLS

REMOTE
RECEIVER
SWITCH

- ON
- REMOTE
- OFF

LED
BRIGHTNESS
BUTTON

- High
- Medium
- Low
- OFF

LED MODE
BUTTON

Figure 5

Summary of Contents for VFLB60FP90N













Reviews: