37001-5-0220
Page 2
Empire Comfort Systems Inc. • Belleville, IL
3. Remove burner base.
See Figure 7.
Figure 7
4. Remove Blower Access Plates by taking out (6) screws
each.
See Figure 8.
Figure 8
5. Place Blower onto blower brackets.
See Figure 9.
Figure 9
6. Hand bend tab as shown in
Figure 10
and secure with
(2) screws.
HAND BEND
TAB INWARD
HAND BEND
TAB INWARD
Figure 10
7. Remove protective connectors on Wire Assembly from
fireplace and discard. Connect Wire Harness to both blowers
and the other end to the Wire Assembly supplied with the
fireplace.
See Figure 11.
TO WIRE ASSEMBLY
(MODULE)
Figure 11
8. Replace Blower Access Plates with (6) screws each.
See Figure 12.
Figure 12
9. Replace burner base and burners removed in steps 2 and 3.
See Figures 6 and 7.
10. Replace Screen Barrier, Glass Frame, and liners removed in
Step 1.
See
Figure 5.
DVCT40 SHOWN
