38434-2-0220
Page 3
Empire Comfort Systems Inc. • Belleville, IL
10. While holding ceramic fiber top liner, place liner bracket in
position as shown. Insert three screws where shown.
See Figures 9 and 10.
LINER BRACKET
Figure 9
Figure 10
11. Center rear liner along rear wall with smooth side forward.
Angle top of liner against rear wall with chamfered corners
toward the bottom.
See Figure 11.
REAR REFLECTIVE
LINER
SMOOTH
SIDE
CHAMFERED
CORNERS
Figure 11
12. Verify the glass is oriented correctly as shown in
Figure
12.
Both front corners are at 90° angles. Slide left-side of
liner along left side of firebox as shown with smooth surface
toward the burners. Liner must go over or around left side
liner bracket. When liner has passed the left side liner
bracket, lower liner and slide forward until it rests behind the
bracket.
See Figure 12.
LEFT
SIDE
LINER
90°
CORNER
LEFT SIDE
LINER BRACKET
90°
CORNER
SMOOTH
SIDE
Figure 12
13. Repeat step 12 for right side assembly.
See Figure 13.
NOTICE:
This liner will be approximately 1/4" offset from
the wall.
RIGHT
SIDE
LINER
90°
CORNER
SHARP
CORNER
RIGHT SIDE
LINER BRACKET
SMOOTH
SIDE
Figure 13
14. Replace logs as indicated in log manual. For log E
(LS30TINF) or log D (LS35TINF) angle front of log toward
right side liner. Log I can be positioned with the lower end
closer to the left side liner.
15. Reinstall glass door and barrier screen.
LINER
BRACKET
REAR
REFLECTIVE
LINER