42603-4-0421
Page 63
The Empire Steel Stoves
Models:
DVP20MS(30,70)(B,F,M)(N,P)-1
DVP30MS(30,70)(B,F,M,S,W)(N,P)-1
CLEARANCES
In selecting a location for installation, it is necessary to provide adequate accessibility
clearances for servicing and proper operation.
Locating and Venting the Direct Vent Stove
Clearances: When facing the front of the direct vent stove the minimum clearances
to combustible construction (material) are the following:
Top of appliance (ceiling) 36 (inches)
Heater Corners
(45° angle) to Wall
4 (inches)
Rear Wall
1 (inches)
Floor
0 (inches)
Side Wall
6 (inches)
Installation on Rugs and Tile
This appliance must be installed on
a flat, solid, continuous surface (e.g.
wood, metal, concrete). This may be
the floor, or it may be raised up on a
platform to enhance its visual impact.
The appliance may be installed on
carpeting, tile, wood flooring or other
combustible material as the appliance's
base extends the width and depth of
the appliance.
6” (153mm)
TO SIDE WALL
6” (153mm)
TO SIDE WALL
6” (153mm) TO
COMBUSTIBLE
MATERIAL
6” (153mm) TO
COMBUSTIBLE
MATERIAL
36” (915mm) TO CEILING OR
VERTICAL PROJECTION
ABOVE APPLIANCE
36” (915mm) TO CEILING OR
VERTICAL PROJECTION
ABOVE APPLIANCE
NOTE: HEATER INSTALLED AT 45° ANGLE IN CORNER
NOTE: HEATER INSTALLED AT 45° ANGLE IN CORNER
4” (102mm) HEATER CORNERS TO SIDE WALL
4” (102mm) HEATER CORNERS TO SIDE WALL
10” DVP20
(254mm)
10” DVP20
(254mm)
10”
DVP20
(254mm)
10”
DVP20
(254mm)
4”
(102mm)
4”
(102mm)
14” DVP30
(355mm)
14” DVP30
(355mm)
14”
DVP30
(355mm)
14”
DVP30
(355mm)
2” (51mm) TO COMBUSTIBLE MATERIAL
2” (51mm) TO COMBUSTIBLE MATERIAL
GAS-FIRED
6” (153mm)
TO SIDE WALL
6” (153mm)
TO SIDE WALL
6” (153mm) TO
COMBUSTIBLE
MATERIAL
6” (153mm) TO
COMBUSTIBLE
MATERIAL
36” (915mm) TO CEILING OR
HORIZONTAL PROJECTION
ABOVE APPLIANCE
36” (915mm) TO CEILING OR
HORIZONTAL PROJECTION
ABOVE APPLIANCE
Web Site:
www.empirecomfort.com
Empire Comfort Systems
Belleville, Illinois