34498-3-0819
Page 1
1. Remove Offset Frame and Glass Frame assembly.
See Fireplace Installation Instructions.
(A)DVCX models only:
Remove control panel.
See Fireplace installation instructions.
2. Adjust bracket to correct position depending on unit you
have.
See Figure 3 below.
3. Place Andirons into Firebox.
•
The Andiron “legs” must sit on the firebox floor, brick,
ember bed, stone, or sheet metal liners.
•
The Rear Bracket of each Andiron must rest upon the
left or right edge of the Burner.
•
If necessary, adjust the height of the Rear Bracket by
loosening the nut on the back side. Use a 7/16-inch
wrench or socket.
4. Replace items removed in Step 1. See Fireplace Installation
Instructions.
DCA1ABL-1 PARTS LIST
Part Number
Description
Quantity Supplied
33971
Andiron
Assembly
2
(A) DVTL FIREPLACE
Figure 1
NoTE:
Logs and embers removed for clarity.
INSTALLATIoN INSTRUCTIoNS
DCA1ABL-1 ANDIRoNS
INSTRUCTIoNS MUST BE LEFT WITH THE oWNER FoR FUTURE REFERENCE AFTER INSTALLATIoN.
FoR USE oN: (A)DVTL27FP90, (A)DVCX FIREPLACES, DVCT(36,40,50)CFP95, AND DVCT40CSP
(A) DVCX FIREPLACE
Figure 2
POSITION A
POSITION B
PoSITIoN (A)
For All Other Units
POSITION A
POSITION B
PoSITIoN (B)
For See-Thru
Figure 3
ANDIRONS
ANDIRONS
REAR
BRACKET
REAR
BRACKET
