Direct TENS
™
20
4.2. Ending Therapy
The default setting of the Direct TENS™ device is
continuous operation. If you want to end the therapy,
switch off the device with the ON/OFF switch.
When the therapy timer is activated, the device switches
automatically off at the end of the programmed interval.
The remaining time is indicated at the top of the display.
Check that the Direct TENS™ stimulator is switched off
before you remove the electrodes.
• If the therapy timer is not activated, switch off the Direct
TENS™ stimulator with the ON/OFF switch.
• Remove the electrodes very carefully. Do not pull on the
leadwires, but on the electrode.
• Reattach the electrode to its protective paper. Be sure
to attach the electrode to the side marked “on”, not to
the side marked “no”.
• Disconnect the electrodes from the leadwire.
• Clean the skin with a mild soap solution.
• Electrodes no longer fit for use can be disposed of with
the normal domestic waste.
Supplied by EME Services Ltd
