Direct TENS
™
21
5. SPECIAL DIRECT TENS™ FUNCTIONS...
5.1. Therapy Timer
The Direct TENS™ stimulator comes with a therapy timer function. When the timer is activated, the remaining therapy
time appears on the display. When this interval has elapsed, the device switches off automatically.
You can set therapy times of:
• 1 to 59 minutes in 1-minute increments
• 1 to 24 hours in 30-minutes increments
• Continuous operation, displayed as CONT. (this is the default setting), the timer is not activated
Follow these steps to activate the timer:
• Press the quick select program key
low back/hip and hold it depressed.
• Then press the ON/OFF key
to switch the device on.
• The display indicates “Time” and the currently set therapy time (default setting: CONT.).
• Press the intensity control keys for channel 2 to set the therapy time. With
you select a longer time,
with
, a shorter time. Go back to 00:00 to get the Continuous mode (CONT.).
• To save the timer settings, turn off the stimulator. When you turn the stimulator on again, the
timer setting you saved is displayed.
5.2
Factory Defaults Settings
• Hold the program selection
key depressed.
• Then press the ON/OFF key
to switch the device on.
• The display shows DATA 000 000 flashing.
• Next press the two intensity decrease keys
simultaneously for channels 1 and 2
to reset the device to the factory defaults:
- All stored data will be deleted.
- The timer function is deactivated.
- The program lock is deactivated.
- The frequency for all programs is reset to the respective default value.
- Program 9 is selected.
- The initial screen is displayed.
Supplied by EME Services Ltd
