EMPHASER EA-S2 Installation & Operating Manual Download Page 12

22

23

WARRANTY COND LIMITATIONS

Dear customer
Please read the warranty specifications below carefully. 

Should your EMPHASER amplifier require warranty service, please return it to the retailer from 

whom it was purchased or the distributor in your country. Do not send any product to EMPHASER 

Inc. U.S.A. Should you have difficulty in finding an authorized EMPHASER service center, details 

are available from your local distributor.

This EMPHASER amplifier is fully warranted against defective materials or workmanship for a period 

of two years from date of purchase at retail to the original buyer. Warranty work will not be carried out 

unless this warranty certificate is presented fully completed with serial number, purchaser's address, 

purchasing date and dealer stamp together with the original sales slip and either an authorized 

dealer's confirmation of installation or authorized dealer's installation approval!

This warranty does not cover any damage due to:

1. Unauthorized or unapproved installation, incorrect audio or mains connection(s).

2. Defects caused by exposure of the amplifier to humidity, water and organic fluids, prolonged

     exposure to sun rays or excessive dirt or dust. 

3. Mechanical defects caused by accidents, fall or impact. 

4. Unauthorized repair attempts and modifications not explicitly authorized by the manufacturer.
This warranty is limited to the repair or the replacement of the defective product at the manufacturer's 

option and does not include any other form of damage, whether incidental, consequential or otherwise. 

The warranty does not cover any transport costs or damages caused by transport or shipment of the 

product. Any additional or further claims and requirements for compensation of auxiliary components 

that have been damaged by the amp in sequence, directly or indirectly, are strictly excluded. 

GARANTIE-BESTIM EINSCHRÄNKUNGEN

Sehr geehrter Kunde,
Wir bitten Sie die untenstehenden Garantie-Bestimmungen genau durchzulesen. 

Sollten Sie für Ihren Verstärker Garantie-Leistungen beanspruchen, wenden Sie sich bitte direkt an 

den Händler, bei dem Sie das Gerät gekauft haben. Bitte senden Sie keine Geräte an EMPHASER 

Inc. U.S.A. Bei Schwierigkeiten, ein geeignetes EMPHASER Service-Center zu finden, erhalten Sie 

bei Ihrem jeweiligen Landes-Vertrieb weitere Informationen.

Der Hersteller gewährleistet auf diesen EMPHASER Verstärker für den Fall von Material- oder 

Herstellungsfehlern zwei Jahre Garantie, ab Kaufdatum in Fachhandel an den Erstkäufer. Garantie-

Ansprüche können nur mit einer korrekt und vollständig ausgefüllten Garantie-Karte zusammen mit 

dem Original-Kaufbeleg geltend gemacht werden.

Nicht durch Gewährleistung oder Garantie des Herstellers abgedeckt, sind Schäden infolge von:

1.  nicht-autorisiertem bzw. ungeprüftem Selbst-Einbau mit in Folge  inkorrekten Audio- und/oder   

 Stromanschlüssen.

2. schädliche Einwirkung von Feuchtigkeit, Wasser, organische  Flüssigkeiten, übermässiger  

 

  Hitze oder Sonneneinstrahlung und starker Verschmutzung. 

3. mechanischer Beschädigung durch Fall, Stoss oder Unfall.

4. Schäden durch nicht autorisierte  Reparaturversuche oder nicht durch den Hersteller  

 

  ausdrücklich autorisierte Modifikationen.
Die Garantie dieses Produkts bleibt in jedem Fall auf die Reparatur bzw. den Ersatz (Entscheidung 

durch Hersteller) des jeweiligen EMPHASER Produkts beschränkt. Schäden durch unsachgemässe 

Verpackung und daraus resultierende Transportschäden werden nicht durch diese Garantie gedeckt. 

Jeder über diese Garantie-Erklärung hinausgehende Anspruch und jede Haftung für direkte oder 

indirekte Folgeschäden werden ausdrücklich abgelehnt.

WARRANTY SLIP / GARANTIE-KARTE

MODEL: 

 

❏ 

EA-S2      

❏ 

EA-S4      

Date of purchase:

Your name:

Your address:

City:

State:                                                       ZIP or Postal Code:

Country:

Your phone number:

Dealer’s address & stamp

  

Installed by 

 

authorized dealer 

Installation date:

Inspected and 
approved by:

Installation Approval

❏  

Self-installed 

 

by customer 

EMPHASER

Exclusive distributor for Europe 

ACR, Brändli + Vögeli AG, Bohrturmweg 1, CH-5330 Bad Zurzach, Switzerland

Phone: (+41) (0)56 269 64 64, Fax:  (+41) (0)56 269 64 65, [email protected], www.acr.eu

EU Legal Representative: 

ACR S & V GmbH, Industriestraße 35, D-79787 Lauchringen, Germany

Summary of Contents for EA-S2














Reviews: