How to Adjust P-Settings
1. Power on the scooter.
2. To access the P-setting menu, hold the power button and the mode (M)
button for 1-2 seconds. The screen will look like this:
3. To cycle through the P-settings, tap the power button. You’ll see the
value change from P1, to P2, to P3.
4. To adjust a P-setting:
a. Select the P-setting to change.
b. Tap the mode button to toggle from the P-setting to the function
setting (lower right corner of screen).
c. To increase this value, tap the power button. There is no way to
decrease the value using the buttons. To use a lower value than
originally set, you must cycle up through all numbers and back to
0 before setting your intended value.
d. To save the P-Setting, long-press the power button to toggle back
to the P-setting, then long-press power again to return to the
main menu.
e. If you do not wish to save the settings, hold the mode (M) button
to return to the main menu.
Last revised 2/14/22
EMOVE Roadrunner | Voro Motors
4
