How to Assemble
1. Remove the packing material.
2. Place the handlebar into the stem of the Roadrunner.
- Don’t tighten them into place yet! This step makes it easier to
remove it from the box.
3. Lift the scooter from the box, open the kickstand, and place it on the
ground.
4. Locate the foot pegs and hex key set.
5. Attach the foot pegs to either side of the scooter by twisting them into
place until they are firm.
6. With the handlebars positioned in the stem, insert a hex key and tighten
the set screw until it is firm.
7. Unlatch the metal folding mechanism on the handlebars and unfold
them.
8. There is a hook on the front side (rider facing) of the folding
mechanism. Attach this side of the mechanism first, then press down on
the metal clasp until it locks, securing the handlebars in place.
How to Charge
1. To charge the scooter, plug the charger into an outlet then insert the
XLR into the charging port located on the battery.
2. On the charger, there is a light, with red indicating it is charging and
green indicating it is fully charged. When the scooter is fully charged,
the light will change from red to green.
Last revised 2/14/22
EMOVE Roadrunner | Voro Motors
2