Getting Started
1. To power on the scooter, press the Power button on the top left of the
LCD.
2. To toggle between power modes, press the M (mode) button.
- 1 = low power
- 2 = medium power
- 3 = high power
3. The Roadrunner has single and dual motor modes.
- Press the R button to engage the rear motor only.
- Press the I button to engage dual motors.
4. The Roadrunner has a removable battery with a locking mechanism.
- To remove the battery, use the attached keys to unlock the
battery.
- Grab the handle and apply slight downward pressure as you slide
the battery out of the rear of the scooter.
Performance Settings
The RoadRunner has three (3) performance settings (p-settings). Below are
the default and recommended settings. Please note that you should not be
adjusting P1 or P2 unless you’re reconfiguring the scooter. Adjust P3 to your
preference to limit the speed of the scooter.
P-Setting
Function
Default
Recommended
P1
Low Voltage Protection
48
48
P2
Rim Size (Tire Diameter)
145 -> 14.5"
145
P3
Speed Limiter (7-25)
15 kmph
User Pref
Last revised 2/14/22
EMOVE Roadrunner | Voro Motors
3
