Emotron EMX-D, Instruction Manual

Page: 20 / 53

Emotron AB 01-5016-01r0 Control Connections 13
4. Control Connections
4.1 Control board
Fig. 10 shows the layout of the control board which is where
the parts most important to the user are located. Although
the control board is galvanically isolated from the mains, for
safety reasons do not make changes while the mains supply
is on!
Fig. 10 Control board layout
WARNING: Always switch off the mains
voltage and wait at least 5 minutes to allow
the DC capacitors to discharge before
connecting the control signals or changing
position of any switches.
Relay outputs
Control signals
Switches
Control
Panel
Not used
Not used