Page 17
Fusion 8100: User Manual
4. Tuner Control Buttons
Press the Tuner On/Off Button to switch directly to the Tuner as your selected input; press it again
to return to your previously selected input. Use the AM/FM Button to switch between the AM and
FM bands. The Freq+ and Freq- buttons change between different AM or FM stations, and the CH+
and CH- buttons step between any station presets you have created (station presets are created in
the Tuner Setup menu).
5. & 8. Return and Exit Navigation Buttons
Used to exit a screen or move up a level in some menus. (Refer to the hints along the bottom of
the OSD if you’re not sure which button to use in a given situation.)
6., 15. Enter Navigation Button and Navigation Ring
Use the Enter Button, and the Up, Down, Left, and Right controls on the Navigation Ring for
navigating the front panel and on-screen menus.
7. Display Button
Press this button to toggle the front panel display between displaying information about which
input is selected and displaying the current audio and video modes.
9. Input + and Input - Buttons
Press these buttons to step through the available inputs on your Fusion 8100.
10. Speaker Level Trim Controls
Use these buttons to temporarily adjust the levels of your various surround speakers. The changes
you make with these controls will
not
be retained when you turn the Fusion 8100 Off. You can
separately adjust the levels of the Center Channel, the Surrounds, the Back Surrounds, and the
Subwoofer with these controls.
11. CEC Control Buttons
These buttons are used to send commands from the Fusion 8100 to other CEC-enabled devices
which are connected to it. Various CEC-enabled devices will respond to some or all of these
command buttons when they are the selected input device. (You may also need to enable this
feature on the source device.) Please refer to the instructions that came with each device for
details.
