Important Safety Precautions and Explanation of Symbols
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important installation, operation, and service instructions in this manual.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltages within the enclosure that may be of sufficient magnitude to
constitute a risk of electrical shock to the user.
Please read this manual thoroughly before attempting to install, configure, or operate the Emotiva Airmotiv
S8 Flex Subwoofer. After successful installation and configuration of the Flex Sub, be sure to retain this
manual in a safe place for future reference.
Safety is a key component to a long lasting and trouble free installation. Please read and follow all
instructions and heed all warnings on the Flex Sub and in this manual. The vast majority of the subsequent
safety precautions are common sense. If you are not comfortable with the installation of audio/video
entertainment equipment, you should seek the services of a qualified installation professional or call us for
help.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THE FLEX SUB NEAR
WATER OR IN WET LOCATIONS, DO NOT EXPOSE IT TO RAIN OR MOISTURE, DO NOT EXPOSE IT TO
DRIPPING OR SPLASHING FROM OTHER SOURCES, AND ENSURE THAT NO OBJECTS FILLED WITH
LIQUIDS (SUCH AS VASES) ARE PLACED ON IT. DOING SO MAY RESULT IN DAMAGE TO THE UNIT AND
THE RISK OF ELECTRIC SHOCK, WHICH MAY RESULT IN BODILY INJURY OR DEATH.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE AMPLIFIER PLATE OR
DRIVERS FROM THE FLEX SUB. THERE ARE NO USER-SERVICEABLE PARTS INSIDE THE UNIT. REFER ALL
SERVICE TO QUALIFIED SERVICE PERSONNEL.
Do not install the Flex Sub near or above any heat sources such as radiators, heating vents, or other
apparatus’ that produce heat. Do not block any ventilation openings or heat sinks. Avoid installing the
unit directly above other heat-producing equipment unless sufficient ventilation or forced-air cooling is
provided.
Do not install the Flex Sub in locations without proper ventilation. The Flex Sub should not be operated
on a bed, sofa, rug, or similar surface that may block vents. The unit should not be installed in an enclosed
location such as a bookcase, cabinet, or closed equipment rack unless sufficient forced-air ventilation is
provided, and clearance should be maintained between the rear-mounted heat sinks and objects like
drapes that may reduce ventilation.
Always install your Flex Sub according to the manufacturer’s instructions and only use attachments or
accessories specified by the manufacturer.
Do not install the Flex Sub on any stand, shelf, or other piece of furniture that is unable to support its
weight. If a cart is used to move the unit, use caution to avoid injury from tip-over.
Connect the Flex Sub only to power sources of the correct voltage (as shown in this manual and on the Flex
Sub unit).
Protect power supply cables from being pinched, walked on, or otherwise damaged. Be especially careful
where the power cable enters the power outlet and the unit.
Only connect the Flex Sub to an electrical outlet or extension cord of appropriate type and rating.
!
!
