background image

S P E C I F I C A T I O N S

All features and specifications are subject to change without notice.

* Trademarks of Dolby Laboratories.

DTS is a registered trademark of Digital Theater Systems, Inc.

Amplifier Power (RMS):

400 Watts

Driver:

12" PolyPlas

(polymer-coated cellulose fiber) cone;

rubber surround; SFG

; magnetic shorting rings;

high-temp, oversized, fiberglass voice coil; HeatScape

motor structure; cast-aluminum basket

Inputs:

Line Level (switchable to LFE), BassQ

and

Speaker Level with gold-plated, 5-way binding posts

Outputs:

BassQ and Speaker Level (High-Pass with
gold-plated, 5-way binding posts)

Low-Pass Frequency:

Continuously variable from 50Hz – 150Hz

High-Pass Frequency:

150Hz when using speaker-level outputs

Frequency Response:

22Hz – Low-pass crossover setting

Dimensions (H x W x D):

17-3/16" (with feet, without spikes) x 16-3/16" x 18" (19" with grille)
437mm (with feet, without spikes) x 411mm x 457mm (483mm with grille)

Weight:

56 lb/25.5kg

JBL Consumer Products

250 Crossways Park Drive, Woodbury, NY 11797

8500 Balboa Boulevard, Northridge, CA 91329

800-336-4JBL (4525) (USA only)  

www.jbl.com 

© 2001 JBL, Incorporated

JBL is a registered trademark of JBL, Incorporated.

Part No.: 338003-001   

D E S I G N   G O A L :

Bring the thrill of live performance and movie sound to

the home environment by calling on JBL’s professional engineering leadership.

W O O F E R   T Y P E :

Pure-cellulose fiber

P O R T   D E S I G N :

FreeFlow™ flared

P R O F E S S I O N A L   R E F E R E N C E :

Studio Monitor

O W N E R ’ S   G U I D E

P R O   S O U N D  
C O M E S   H O M E

P R O D U C T L I N E :  

STUDIO

SERIES

M O D E L

S120P

II

N U M B E R :

Summary of Contents for Studio S120PII









Reviews: