11
1 General
This control has four outlets. Outlet Heating (16) is for heating, Outlet Lamp (15) is for the
transformer of the lamp and Outlet Pump (14) is designated for the pump. Outlet Fan (12) is
designated for connection of a fan that is only switched on and off. This outlet cannot be
regulated.
Controls and sensors are connected to 5V or 12V controller-voltage (safety extra-low voltage,
SELV)
The Whirlpool is operated by the switch mounted on the edge of the tub. All time values in
this operating manual serve as guidelines. Should any technical changes be made, all rights to
guarantee fall away.
( )..... terminal block designation
1.1 DIP-switch description
S1 no function
S2 no function
S3 Dryer manual/automatic
S4 Interval on/off
2 Description of the status indicator (LED) at the switch
If the controller is connected to the power grid, the status indicator (LED – light emitting
diode) of the pump or fan symbol every 8 seconds for 0.5 seconds = “mains voltage present”.
When the water in the tub reaches the filling level (hight of TLS) the blinking rhythm of the
status indicator changes to a constant blinking of 0.5 seconds = “pool ready”. After the “pool
ready” message appears, all functions can be used. If a function is active, then the LED of the
respective function will be illuminated. If a function is active after the tub has been emptied
(according to specification, for example, the dryer with blower) the blinking rhythm of the
status indicator at the switch will change to double blinking with a 0.5 second pause. If all
functions have been completed, the status indicator will display the “mains voltage present”
blinking function.
Summary of Contents for Optimus 170 Premium left
Page 4: ...4...
Page 7: ...7 Using the touch screen 1 Air nozzles 2 Water jets large jet 3 LED Light Therapy...
Page 9: ...9...
Page 10: ...10...
