Emotion Tech mDelta, Assembly Instructions Manual

Page: 7 / 67

Safety instructions - Printed parts 7
Safety instructions
General safety instructions
ALWAYS HAVE ADULT SUPERVISON WHEN USING THE PRINTER.
The nozzle can reach 270°C, TO AVOID BURNING, DO NOT TOUCH THE NOZZLE WHILE THE PRINTER IS
WORKING.
KEEP THE PRINTER AWAY FROM CHILDREN AND ANIMALS.
OPERATE IN A VENTILATED ROOM.
Plastic fumes effects are not known. In case of use in a closed room we
recommend the use of an extractor fan.
The addition of protections is your responsibility. Safety can be improved by:

An emergency stop button

Housing protection

Smoke detector
CE marking
µDelta is a 3D printer kit. It includes all the parts you need for assembling but does not include additional
protections.
Electrical safety.
The power supply provided is labelled CE. The Power supply is protected against short-circuit and do not need
any modifications. The µDelta operate at voltage of 12V and is not concerned by the low voltage directive.
Further information
Information above are not exhaustive.
We used sources of information we consider as reliable. However, we cannot guarantee that all these
information are true and complete.
We assume no liability for loses, injuries or damages due to assembly, transporting, storage, use, assembly,
transporting or removal of the product.